Maintenance methods for emulsifying equipment?

Maintenance methods for emulsifying equipment?                                                                                                              

In production, in order to maintain the working efficiency and product quality of the emulsifier as well as to prolong the service life of the emulsifier, the emulsifier must be used and maintained regularly. YALIAN MACHINERY reminds you of the following points for the maintenance and use of the emulsifier:

1. Do a good job of daily cleaning and sanitation of emulsifier.

2. Maintenance of electrical equipment: It is necessary to ensure the equipment and electrical control system are clean and sanitary, do well in damp-proof and anti-corrosion work, and do well in ventilation and dust removal of frequency converter. Failure to do a good job in this respect may have a great impact on electrical equipment and even burn out electrical equipment. (Note: Switch off the main gate before the maintenance of the electrical appliances, lock the electric box with the padlock, and do a good job of safety signs and safety protection).

3. Heating system: The safety valve should be inspected regularly to prevent the valve from rusting, death and contamination failure. The steam trap should be checked regularly to prevent blockage of debris.

4. Vacuum system: Vacuum system, especially water-ring vacuum pump, sometimes burns the motor due to rust or foreign matter blocking the rotor during use. Therefore, check for stalling during routine maintenance. The water ring system should be unblocked. If there is any rotation blockage when starting the vacuum pump during use, stop the vacuum pump immediately and clean it up before starting it again.

5. Sealing system: There are many seals in the emulsifier. The dynamic and static rings should be replaced regularly for mechanical seals. Depending on the frequent use of equipment, the cooling system should be checked frequently for double-end mechanical seals so as not to burn out the mechanical seals due to cooling failure. Frame seal, according to the characteristics of the material, select the appropriate material, and regularly replace in use according to the maintenance manual.

6. Lubrication: motor and reducer, change lubricant regularly according to the use manual. If used frequently, check the viscosity and acidity of lubricant in advance and change lubricant in advance.

7. Users must send instruments and meters to relevant departments for verification regularly during the use of equipment to ensure the safety of equipment.

8. In case of abnormal sound or other malfunction during operation of emulsifier, stop the machine immediately and check for troubleshooting before running.