This browser does not support the video element.
Product Description
1. 5.5KW Electric Lift High Shear Homogeneous Emulsifier Chemical Cosmetic Emulsifier Electric Lift Homogeneous(Overview)
The characteristic of the homogenizer is that it is movable, and the frame can be raised and lowered to raise the main shaft, which is convenient for moving in and out of the material cylinder, and does not require a hydraulic system, thereby simplifying the structure of the entire machine and reducing the incidence of failure.
2. 5.5KW Electric Lift High Shear Homogeneous Emulsifier Chemical Cosmetic Emulsifier Electric Lift Homogeneous(Working principle)
In the narrow gap between the stator and the rotor, the materials are subjected to comprehensive effects such as high-speed shearing, centrifugal extrusion, impact tearing and Trent flow every minute, so that the immiscible phases are instantly decomposed under the combined action of corresponding mature technology and appropriate amount of additives.
Evenly disperse and emulsify, and after high-frequency cycles, finally get a foam-free, fine and stable high-quality finished product.
3. 5.5KW Electric Lift High Shear Homogeneous Emulsifier Chemical Cosmetic Emulsifier Electric Lift Homogeneous(Operate)
This model is flexible in operation and suitable for relatively small batch production, and the capacity of the material tank is suitable from 20 kg to 500 kg.
It only needs to be pushed by hand for normal movement, and the material cylinder can be replaced at any time according to production. Stainless steel tanks can also be customized in our factory.
4. 5.5KW Electric Lift High Shear Homogeneous Emulsifier Chemical Cosmetic Emulsifier Electric Lift Homogeneous (Main purpose)
It is suitable for the manufacture of homogeneously dispersed emulsions of medium and low viscosity emulsions, etc., and is suitable for most formulation requirements.
The special rotor and stator generate strong shear, grinding, impact and turbulent flow, emulsifying oil and water, and the particle size reaches a stable state ( 1-2μm).
1. You can choose 220V or 380V voltage arbitrarily.
2. The power of the main motor can be selected from 0.37KW ,0.75KW, 1.1KW, 1.5KW, 2.2KW, 3KW, 4KW, 5.5KW, 7.5KW, 11KW.
3. There are three types of motors: variable frequency speed regulation motor, ordinary motor and explosion-proof motor.
4. Caster design, easy to move, and the casters are equipped with brakes for fixing.
5. The positioning bolts fix the swing of the material cylinder, and it is very convenient to move and fix.
6. There are two types of frame materials: SUS304 stainless steel and channel steel, and the prices are also different.
7. There are two types of lifting methods: electric lifting and pneumatic lifting. The lifting stroke of the standard model can reach 800mm-1000mm, and the lifting height can also be designed according to the height of the barrel.
8. It adopts frequency conversion speed regulation, which is stable and easy to operate.
9. There are two types of high-shear homogenizing head: ordinary type and integral wire cutting.
10. The motor can choose domestic or imported ABB motor.
11. The speed of the high-shear homogenizing head is 0-3000 rpm.
We are manufacturer !!!
AMANDA@YALIANMACHINERY.COM
| Model | KW | Lift hight (mm) | Speed(r.p.m) | Capacity(L) | Diameter of padder(mm) | Weight(kg) |
|---|---|---|---|---|---|---|
YMT-0.75 | 0.75 | 600 | 0-3000 | 10-50 | 100 | 50 |
YMT-1.1 | 1.1 | 10-60 | 100 | 50 | ||
YMT-1.5 | 1.5 | 10-100 | 100 | 90 | ||
YMT-2.2 | 2.2 | 800 | 20-150 | 150 | 100 | |
YMT-3.0 | 3 | 20-200 | 200 | 120 | ||
YMT-4.0 | 4 | 20-300 | 200 | 150 | ||
YMT-5.5 | 5.5 | 1000 | 50-350 | 200 | 200 | |
YMT-7.5 | 7.5 | 50-400 | 200 | 230 | ||
YMT-11 | 11 | 50-500 | 200 | 260 |
Note: The data in this table are inconsistent due to technical improvement and customization, and the actual product shall prevail.
Stainless steel SUS316L homogenizing head speed 0-3000RPM
No. | Name | Remark |
1 | Power | 4KW |
2 | Voltage | 380V 50HZ |
3 | Lift hight | 800-1000mm（Can custom） |
4 | Lift method | penumatic/electric |
5 | Homogenizer speed | 0-3000rpm（VFD） |
6 | Height of homogenizer head | 850mm(Can custom) |
7 | Diameter of shaft | 25mm |
8 | Capacity | 200KG |
9 | Materials | SUS100mmX50mmX5mm |
10 | Brand of motor | Siemens |
11 | Size | L1100mmXW1100mmXH2100mm (DEPEND ON FACT) |