Guangzhou Manufacturer - Installation Precautions for Commonly Fixed Emulsifiers

Guangzhou Manufacturer - Installation Precautions for Commonly Fixed Emulsifiers                                                                  

Guangzhou Yalian Mechanical Emulsifier is an indispensable and important equipment in the production and processing of all industrial industries.

Because emulsifier equipment is very effective in shearing, dispersing and impacting materials, the processed materials can become more delicate and at the same time promote the integration of oil and water! This is the main reason that the major industrial industries choose emulsifier equipment! Emulsifier equipment is not only used in major industries, but also in pharmaceutical, food and cosmetics industries.

In addition, the installation and use of emulsifier equipment emulsion pump is also very important. What matters need attention when installing and using the emulsion pump are introduced in the following section?

1. The fixed emulsifier is usually installed at the bottom of the reactor or or pipeline. Material enters from the inlet port, is sheared at high speed and enters from the outlet port. It can be operated continuously or used in the reciprocating process. Metal bellows should be used as far as possible for flexible and convenient alignment.

2. The seat cushion of fixed emulsifier is stable and fixed with anchor bolts. Future operating and maintenance space should be considered during installation.

3. For materials with poor liquidity, it is recommended to use a pump with matched inlet flow.

4. During installation, the inlet and outlet of equipment must be equipped with equal-diameter valves to control the metering and maintenance of inlet and outlet materials.

5. Connect power supply according to motor nameplate and do a good job of grounding device. It is strictly forbidden to operate the equipment before any liquid enters the machine to avoid damaging the mechanical seal. When excessive current is found, the motor can not operate normally when it is normally turned on. (1) First check whether the power line device is loose or too thin, which does not meet the requirements. (2) Check the pipeline for *** welding slag, nails and other impurities. (3) Check whether the material is too much or too hard.

The essence of emulsifier is a high-efficiency equipment which integrates mixing, dispersing, crushing, dissolving, fine, disaggregating, homogenizing and emulsifying. The main working parts of the equipment are composed of stator, rotor, etc. Under the action of centrifugal force and hydraulic force, the stator performs comprehensive functions such as strong shear, centrifugal extrusion, impact cracking, friction of liquid layer and uniform turbulence. The equipment can make the incompatible solid, liquid, gas and other media refine, disperse and emulsify uniformly in a moment, then reciprocate to achieve a more stable state of the product.

After using this series of products, not only the traditional production process is greatly simplified, but also the production efficiency and product quality are greatly improved. The series products are widely used in petrochemical industry, fine chemical industry, daily chemical industry, biopharmaceuticals, food process, paper making, environmental protection, paint and coating industries, and to a certain extent, promote the development and progress of social productivity.