This browser does not support the video element.
Capacity :50L;100L;200L
YS Series - 100L Small Model Mixer：Mainly feature
· Capacity ranges from 50L to 200L;
·Suitable for pastes and emulsions with viscosities2000-10,000 cps;
·High-speed dispersor is installed at the top, which has strong dispersion.
·Strong homogenization with push-in batch homogenizer;
·The frame stirrer has a triangular design to enhance mixing;
·Mixer, dispersor or homogenizer transmission;
·The complete process of mixing, dissolving, dispersing, emulsifying, homogenizing, heating and cooling in one;
·Double jacket for heating and cooling;
·Different jacket designs can be used for steam and electric heating.
·Electrical heating dual temperature probe and controller for mixing tank;
·All contact parts are SS304/316L, mirror polished;
·The specifications of closed two-axle mixer conform to GMP.
·Button control panel for easy operation;
·Power supply 380V, 50Hz, 3-phase;
YS Series - 100L Small Model Mixer：Mainly specification
| Working capacity (L) | Agitator power (kw) | Speed (rpm) | Homogenizer power (kw) | Speed (rpm) | Vacuum power (Option) | Heater method (option) |
|---|---|---|---|---|---|---|
50 | 0.37 | 0~65 | 1.5 | 0~3300 | 0.37 | steam heating / electric heating |
100 | 0.75 | 0~65 | 2.2 | 0~3300 | 0.37 | steam heating / electric heating |
200 | 1.5 | 0~65 | 4 | 0~3300 | 1.5 | steam heating / electric heating |
1. Cosmetics industry: lotion, facial cleanser, essence, moisturizing cream, hand cream, toner, perfume, alcohol gel hand sanitizer, etc.
2. Daily chemical industry: shampoo, conditioner, laundry detergent, hand sanitizer, detergent, shower gel, glass cleaner, car wash, bleach, detergent, shampoo, plant liquid fertilizer, toilet cleaner, alcohol gel hand sanitizer, etc.
3. Pharmaceutical industry: emulsion, suspension, injection, oral syrup, oral liquid, gel, etc.
4. Food industry: sauces, condiments, food slurry, nutrient solution, food, chocolate, sugar, wax products, dairy products, fruit juice, jam, milk drinks, etc.
5. Chemical industry: paints, coatings, dyes, inks, silicone oils, resins, lubricants, nanomaterials, etc.
Online CIP cleaning (only applicable to fully enclosed structure).
Designed according to the sanitary requirements, the structural design is easy to operate, the stirring transmission is stable and the noise is low.
Appropriate diameter-to-height ratio design, custom-made stirring device on demand, good stirring and blending effect.
Specially set up a device to prevent the material in the tank from being polluted if the reducer leaks oil, which is safe and reliable, and the material has no risk of pollution.
The inner surface of the tank is mirror polished (roughness Ras0.6μm); the openings of the inlet and outlet nozzles, sight mirrors, manholes and other art openings and the welds of the tank body adopt the arc transition of stretching and flanging technology, which is smooth and easy to clean There is no dead angle, the production process is reliable and stable, and it meets the requirements of "GMP" and other specifications.
YALIAN MACHINERY discloses a high-efficiency emulsification equipment scraping agitator, start the motor, and the motor drives the main stirring blade to rotate through the stirring shaft to perform high-efficiency emulsification. , sliding in the limit groove, so that the rotation of the slider drives the revolving frame to move up and down. The setting of the baffle plate 1 and the baffle plate 2 prevents the slider and the sliding sleeve from falling off. The rotation of the slider drives the scraper block to scrape the inner wall. The frame drives the scraper block to move up and down to expand the scraper area and prevent the material from sticking to the inner wall. At the same time, the rotating frame drives the auxiliary mixing blade to move up and down and rotate to mix the upper and lower layers of the material and improve the uniformity of material mixing.
The processed with three homogenizing heads (rotor and stator), which can obtain a very narrow particle size distribution, and obtain smaller droplets and particles, so the resulting gel has a smaller particle size and more transparency. high.
It consists of 1-3 working chambers. Under the high-speed drive of the motor, the material moves at high speed in the narrow gap between the rotor and the stator, forming a turbulent flow. The material is subjected to stronger hydraulic shearing, centrifugal extrusion, high-speed cutting, Impact and grinding and other comprehensive effects, so as to achieve the effect of dispersion, emulsification and crushing. The processed material itself, its physical properties, the number of working chambers and the time for controlling the residence time of materials in the working chamber determine the particle size distribution range, the effect of homogenization and refinement, and the size of the output.
Guangzhou YALIAN Equipments Co.,Ltd to undertake domestic and international business, technology research and development center to undertake the enterprise's technology research and development work. For more than 80 countries and regions to provide the chemical industry single machine, complete equipment and production line, the whole plant turnkey services. It plays an important role in the construction of domestic and overseas projects and the investment activities of international and domestic partners. Technology research and development center is dedicated to the design and development of dispersing equipment, high shear emulsifying equipment and emulsifying pump, mixing equipment, filling and packaging equipment, powder conveying system, reaction reactor, various pressure vessels and mask machinery. Under the leadership of the company's technology research and development center team, has obtained a number of patents, won a number of awards, and published a number of technical articles in international and domestic industry magazines.